Best Custom Figurine From Photo Services

By Kenneth Chen

Source: https://jujubit.ai/blogs/journals/best-custom-figurine-from-photo-services

The useful comparison is not which service calls itself the best. It is which one matches your size, your deadline, and whether you want to see the result before it is made. Four services that turn a photo into a physical figurine publish their prices and terms openly, and those pages disagree on every point that changes what you pay. This is a comparison of published information, checked on November 14 and 15, 2026. We did not place an order with any of them, including our own, so nothing here is a test of print quality or likeness. Where a service does not publish a number, the cell stays blank rather than guessed. The short answer Compare the same size. The lowest "from" price belongs to the smallest figurine, and the services start at different sizes. Ask whether the color is printed or painted. One service ships raw resin and charges €129 or more to paint it. The others print the color into the material. Check the preview rules before you pay. One service previews for free and lets you revise for free. Another shows a quick 2D preview. A third charges $5 for an optional print preview and splits modeling out as its own fee. Add the weeks, not just the price. Published timelines run from about two weeks to six. Check where it ships. One service delivers only inside the European Union. What each service publishes Every row below comes from the service's own pages, read November 15, 2026. JuJuBit is our own company, listed on the same terms as the others. A dash means the service does not publish that fact. For two other photo-to-figurine options outside this table, see JuJuBit vs. KibiFig and JuJuBit vs. Dodowish . JuJuBit SnapFig My3DSelfie (3Daily) Minivatar Sizes 4 to 15 cm 6 to 15 cm 3 to 6 in resin, up to 12 in sandstone 54 to 180 mm One person, smallest $29.99 at 4 cm $69.00 at 6 cm $99 at 3 in €18 at 54 mm One person, near 6 cm $69.99 at 6 cm $69.00 at 6 cm $129 at 4 in, $229 at 5 in €31 at 110 mm Color Printed full color Printed full color Printed full color Raw resin, painting extra Preview Free, before you pay Free, after you order 2D preview free, print preview $5 2D preview in under 3 minutes Revisions Change it before you order Free, before you approve Free, before production — Time 7 to 10 business days, then shipping 10 to 15 business days, then 7 to 15 4 to 6 weeks, production and shipping together Within 10 business days after the model is approved Ships to Worldwide Worldwide Worldwide European Union only People per figurine One or two Up to two — One The prices move, so treat the table as a dated snapshot and confirm each figure on the service's own page before you order. Line up the size before the price The cheapest-looking option is usually just the smallest one. Put the four starting prices in a row and they look far apart: €18, $29.99, $69, and $99. They describe four different objects. SnapFig's $69 starts at 6 cm. JuJuBit's $29.99 starts at 4 cm, and its 6 cm figurine is $69.99. At the one size both sell, the two are $69.00 and $69.99. The gap that the starting prices suggest is not there. My3DSelfie starts higher because its smallest full-body resin figurine is already 3 inches, about 7.6 cm, at $99 in standard clothing. Its 4 inch version is $129 and its 5 inch version is $229. Nothing in that range is a 4 cm piece, so setting its $99 against a $29.99 price compares two different sizes. Minivatar is the other direction. Its €18 is a 54 mm figure, close to 5 cm, but it arrives in raw resin. That is a fair price for what it is, and it is not a full-color figurine. So read every "from" price as "from this price, at this size." If a listing gives the price and not the size, you do not have enough to compare it. Photo: A 4 cm figurine of a woman in a green robe, held between a thumb and fingers. Customer photo from a JuJuBit review, 2026-06-21, 4 cm. The smallest full-color size, for scale. How the color gets there changes the price Three of the four print the color as part of the figurine. SnapFig says the colour is cured into the material rather than painted onto the surface. My3DSelfie's materials page says the color is baked in and no painting is required. JuJuBit prints in full color, with the color formed during printing rather than painted on afterwards. Minivatar does the opposite. Every figurine ships unpainted, and the hand-painted option is €129 for a 150 mm figure and €169 for 180 mm, against €38 and €45 unpainted. Painting costs more than three times the figurine, and it is only offered at those two large sizes. Printed color has its own limit. It cannot make a reflective metallic finish, so gold, silver, and bronze come out flat. If the photo depends on something that shines, printed color will not reproduce it and you would need a painted finish or a different material. What you can see before it is made This is the part most likely to surprise you, because the services use the word "preview" for different things. JuJuBit generates a 3D preview you can rotate before you pay, and you can change the style or the photo until you are happy, then order. Nothing is charged to look. SnapFig also previews for free, but after you have ordered. Its artists build a digital preview, revisions at that stage cost nothing, and nothing is produced until you approve it. You pay first and approve second, with the revisions as your protection. My3DSelfie splits the work into two bills. Its FAQ shows pricing as modeling, plus printing, plus any add-ons, and says there are no hidden fees. The modeling part is a polished preview that an artist cleans up, and the amount of that charge is not listed on the page, so we cannot tell you what it is. On top of that, an optional print preview costs $5. Revisions are free before production begins. Minivatar shows a 2D preview in under three minutes and then prepares the 3D model within 24 business hours of your approval. The practical difference is when your money is committed. With a pay-later preview you can walk away at no cost. With a pay-first preview you are relying on the free revisions and on the refund rules, which are the next thing to read. Photo: A chibi figurine of a Siamese cat dressed as a samurai, holding a sword. Customer photo from a JuJuBit review, 2026-07-28, 10 cm. The reviewer said it came out exactly as the preview showed. How long it takes, and where it ships Add the production time and the shipping time separately, because most services quote them apart and one quoted number can hide the other. At JuJuBit, production takes 7 to 10 business days, then standard US shipping takes 5 to 12 and international shipping takes 10 to 25. Express shipping starts at $29.99 and takes 5 to 7 business days. The product page also says standard delivery usually takes 7 to 12 days, which is shorter than the shipping policy, so this comparison uses the policy. SnapFig takes 10 to 15 business days of crafting after you approve the preview, then 7 to 15 business days of shipping to the US and EU. The clock starts at your approval, not at checkout, so slow feedback on the preview adds to the wait. A paid expedited option removes 3 to 5 business days from the crafting stage only. My3DSelfie quotes a single range: once the order moves into production, production and shipping together typically take 4 to 6 weeks. It does not publish the two parts separately, and it says rush options may be available. Minivatar prints to order and ships within 10 business days after the 3D model is validated, and it only delivers to France and the rest of the European Union, specifically to avoid customs. If you are outside the EU, it is not an option regardless of price. One more timing trap: the shipping clock usually starts when you approve, not when you pay. A service that looks faster on paper loses that advantage if its preview stage has a queue. Photo: The JuJuBit gift box a figurine order arrived in, on a desk. Customer photo from a JuJuBit review, 2026-03-20, 4 cm order. The packaging an order arrives in. How many people, and what you can change later SnapFig allows up to two subjects in one figurine: two people, or one person and a pet. For a bigger group it suggests one figurine per person. Minivatar is stricter and says it outright: each figurine is one person, so a couple means two figurines and two prices. JuJuBit sells one-person and two-person versions at each size, with the two-person price close to double. My3DSelfie does not state a limit on the pages we read. The refund terms decide how much the preview is really worth. SnapFig does not cancel orders, allows photo or detail changes only inside the first 12 hours, and does not refund because you changed your mind. Damage in transit and manufacturing defects are replaced free. My3DSelfie offers free revisions before production and says that because every piece is custom-made, it generally cannot refund once production has started. Read these before you pay, not after, since both windows close quickly. Pick by your constraint Which factor matters most to you? 1 Question 1: Is there a deadline? Add both clocks Count production and shipping separately. Use express shipping if the slow end misses the date. 2 Question 2: Do you want to preview before you pay? JuJuBit Free 3D preview before you pay. The others SnapFig previews after you order. My3DSelfie charges extra for a print preview. Minivatar shows a 2D preview. 3 Question 3: Are you outside the EU? Minivatar is out It ships inside the European Union only. The other three ship worldwide. A worked example Say you want one person at about 6 cm, in full color, shipped to the US, as a gift three weeks away. JuJuBit at 6 cm is $69.99. Production plus standard US shipping is 12 to 22 business days, so the slow end misses a three-week deadline. Express at $29.99 brings the shipping down to 5 to 7 business days and the total close to $100 before tax. SnapFig at 6 cm is $69.00, essentially the same price, but its 10 to 15 business days of crafting start only after you approve the preview, and shipping adds 7 to 15 more. Even the fast end is 17 business days and it begins late, so three weeks is tight unless the preview comes back immediately. My3DSelfie's 4 inch figurine, the closest it sells, is $129 in standard clothing, and its 4 to 6 weeks covers production and shipping together. That is both more money and more time than the deadline allows. Minivatar does not ship to the US at all. On published terms alone, the express option at the first service is the one that fits this deadline. That is a statement about the published timelines, not about which figurine looks better. We did not order any of them. Frequently asked questions Which service is cheapest? For a full-color figurine, the lowest published price is $29.99, at 4 cm. The €18 figure is cheaper and smaller, but it arrives unpainted and only ships inside the European Union. Compare the same size and the same finish, or the cheapest option is just the smallest one. Why do two services charge about the same at 6 cm but advertise very different starting prices? Because they start measuring at different sizes. One starts at 4 cm for $29.99 and reaches $69.99 at 6 cm. The other starts at 6 cm for $69.00. The starting prices describe different objects. Can I see the figurine before I pay? At JuJuBit, yes. You get a 3D preview you can rotate, and you pay only when you order. At SnapFig the preview is free but comes after you order, with free revisions before anything is made. At My3DSelfie the optional print preview costs $5 and the modeling is billed separately. How long does a custom figurine take? Plan on two to six weeks depending on the service. JuJuBit is 7 to 10 business days of production plus shipping. SnapFig is 10 to 15 business days after you approve the preview, plus shipping. My3DSelfie quotes 4 to 6 weeks for production and shipping together. Minivatar ships within 10 business days of approval, inside the EU only. What if the color needs to look metallic? Printed full color cannot reproduce a reflective metallic finish. Gold and silver come out flat. For a real shine you need hand painting, which one service prices at €129 and up, or a different material. What if I change my mind after ordering? Move fast. SnapFig allows changes only within 12 hours and does not offer refunds for a change of mind. My3DSelfie revises for free before production and generally does not refund once production starts. Approving a free preview before you pay avoids the problem. Pick by the constraint that matters If a deadline is fixed, choose by the timeline and use express shipping where it exists. If you are outside the EU, drop the service that only ships inside it. If you want to see a real preview before spending anything, choose the service that shows one before payment. Create your figurine and see the preview For the thinking behind the prices, see what a custom figurine costs . For what each size looks like next to everyday objects, see the size guide . JuJuBit's prices come from the live product page variants, and its production and shipping times from the live shipping policy, both checked on November 14, 2026. The product page's shorter delivery line is quoted only to flag that it conflicts with the policy. SnapFig's prices come from its product data and its terms from its FAQ, My3DSelfie's resin prices from its product catalog and its terms from its FAQ and materials pages, and Minivatar's prices and shipping limits from its own pricing guide, all read on November 15, 2026. We did not place a test order with any service, so this covers published terms only and says nothing about print quality or likeness. Prices change, so confirm each one on the service's own page.